PTFE Balls Supplied in Rajkot
Hemsun Engg. Industries supplies PTFE balls to Rajkot’s engineering cluster — Metoda GIDC, Shapar-Veraval, Aji GIDC and Bhaktinagar — direct from our Dahegam factory. We manufacture solid PTFE spheres from 5 mm to 310 mm to drawing, which suits Rajkot buyers who are building valves and pumps rather than maintaining them.
Rajkot is a manufacturing city rather than a process city, and that changes what buyers need. Here PTFE balls go into products being assembled — submersible and monoblock pumps, ball check valves, diesel engine ancillaries and fittings — so the requirement is repeatable OEM quantities against a fixed drawing, with consistent diameter and roundness batch after batch. That is a different conversation from the one-off maintenance spares a chemical plant buys, and it is why die control and in-house grinding matter to Rajkot customers.
- Manufacturer
- Hemsun Engg. Industries
- Factory
- Dahegam, Gandhinagar, Gujarat, India
- Size range
- 5 mm to 310 mm solid; hollow PTFE balls also produced
- Serving
- Rajkot, Gujarat
Who Buys PTFE Balls in Rajkot
The industry mix in Rajkot determines which grade, diameter and tolerance make sense. These are the sectors we supply and what they use the spheres for.
Pump manufacturing
Check spheres built into submersible, monoblock and reciprocating pump assemblies.
Valve and fittings manufacturing
Soft-seat ball elements for ball check and non-return valve production.
Diesel engines and ancillaries
PTFE spheres in fuel and lubrication non-return circuits.
Castings and machine tools
Low-friction spheres in hydraulic and pneumatic sub-assemblies.
Bearing and seal assembly
Precision-ground PTFE balls where consistent roundness is a build requirement.
Industrial Areas We Supply
We supply buyers directly across these Rajkot industrial estates and belts.
- Metoda GIDC
- Shapar-Veraval industrial belt
- Aji GIDC
- Bhaktinagar industrial area
- Gondal Road industrial belt
- Kuvadva GIDC
Supply & Lead Time for Rajkot
| Distance from our factory | Approximately 220 km by road from Dahegam |
| OEM supply | Repeat batch production against fixed drawings and release schedules |
| Tolerance control | In-house centerless grinding and 100% dimensional audit before dispatch |
| Documentation | GST invoice, e-way bill, dimensional report on request |
Common PTFE Ball Applications in Rajkot
- Check balls in submersible and monoblock pump assemblies
- Ball check valve soft-seat elements
- Fuel and lubrication non-return spheres
- Hydraulic and pneumatic circuit check balls
- Float spheres in level control assemblies
Why Buy Direct From the Factory
We mold, sinter, turn, grind and inspect every ball in our own plant. That is the whole difference between us and a trading intermediary — the die, the sintering cycle and the tolerance are all answerable to you.
35+ years in production
Manufacturing precision polymer spheres in India since 1990.
No trader margin
You buy from the party that actually makes the ball, at factory pricing.
5 mm to 310 mm
Including large diameters most suppliers cannot produce void-free.
Drawing-based work
In-house die fabrication for custom diameters, tolerances and features.
We Also Supply
PTFE Balls in Rajkot — FAQ
Can you supply repeat OEM batches to a fixed drawing?
Yes, and that is most of what we do for Rajkot. Once the die is proved against your drawing, subsequent batches run to the same diameter and tolerance. We keep the die so repeat orders do not restart tooling.
Do you supply engineering plastic balls besides PTFE?
Yes. Rajkot pump and valve builders often need Delrin (POM), nylon, polypropylene, UHMWPE or PEEK spheres alongside PTFE, and we manufacture all of those from the same plant.
What tolerance can you hold on production quantities?
Achievable tolerance depends on diameter and grade. We confirm the guaranteed band against your specific drawing rather than quoting a single number, because a 6 mm ball and a 250 mm ball are not comparable. Every batch is dimensionally audited before dispatch.
Is there a minimum order quantity for OEM supply?
Minimums depend on diameter and whether a new die is needed. For standard diameters the minimum is low; for a custom diameter requiring fresh tooling we quote the die cost and a viable first-batch quantity together.
Request a PTFE Ball Quote for Rajkot
Tell us the ball diameter (5 mm to 310 mm), material grade, quantity, and application. In-house PTFE ball manufacturer & OEM — Dahegam, Gandhinagar, Gujarat, India.
- Response within 24 hours on business days
- MOQ flexible — samples and OEM volumes
- Engineering drawings accepted
- Export supply worldwide
- Metric and inch sizes from 5 mm to 310 mm
224/1, Nr. Precision Autowares, Nr. IOCL Petrol Pump, Zak-Vahelal Road, Dahegam
Gandhinagar, Gujarat 382305
India